personalized gift for baby
custom wedding gifts Free Pattern for a Mini Christmas Tree Skirt customized gifts for mom
Views: 120 Updated: :2020-03-27

Today I’;m sharing a tutorial for this Christmas Table Runner and Tabletop Christmas Tree Skirt. Do you have a cute little tabletop Christmas tree? Why not make a quick and easy tree skirt for it? Plus you might have enough fabric left over to make a table runner to match!

Free Pattern for the Table Runner can be found HERE.

sofa pillow covers

To begin, you need 11 honey bun strips (or 11 strips of 1 1/2″; wide fabric). You need to arrange them in a color pattern that starts in the center and mirrors out to the edges. ?Make sure you match the colors in rows 1 &; 11, 2 &; 10, 3 &; 9, 4 &; 8, 5 &; 7 and row 6 will be your center row.

You need them to match because you are going to cut them into triangles and flip the template after each cut. (if you are confused now, don’;t worry just keep reading it will make sense with the photos).

Sew all rows together with 1/4″; seam. Press all seams to one side.

Nextcustom wedding gifts, you need to make a template.

To do this you need 1, 12×;12 piece of paper. Cut it to 9×;12, find the center of the 9″; side, measure from the center down to the opposite corners, cut. Repeat on the other side. ? You should now have an isosceles triangle that is 9″; wide by 12″; tall.

If you haven’;t already, cut off selvage edges of your sewn strips.

After you have made your template, lay it out on your sewn rows of fabric. Using your ruler &; rotary tool, cut out the triangle, making sure that it is all the way over to the edge, you will need every centimeter of fabric, so double-check it.

Next, flip the template 180 degrees. ?Line up the edge of the template with the cut edge of the fabric strip.

Cut out your next piece.Flip template again and repeat, until you get 9 triangles.

(note your last triangle you may be a little short, don’;t worry still cut it, that will be the edge piece of your tree skirt).

Arrange your cut pieces into a circle, alternating patterns. (you will have 2 next to each other that are the same pattern, use this as the “;seam”; or opening of your tree skirt).

Sew pieces together with 1/4″; seam. Leave one seam open, this will be the opening of your tree skirt.

Cut out the center of the skirt, leaving 1″; of the red strip still showing. (if your tabletop tree has a wider trunk, cut a larger hole).

If you wish to hand embroider a phrase on your tree skirt do it now. ?Print off your words, (the font I used is called Noodle). Then using a lightbox and a water-soluble pen, trace the letters onto the tree skirt.

Hand embroider the words you traced, using a simple backstitch.

When finished with the embroidery, layer with batting and backing and quilt as desired. I just did a stitch in the ditch.

Cut 6 pieces of ribbon about 10″; long. ?Pin to the opening of the tree skirt. Sew in place before you bind it.

Sew on binding, making sure not to catch the ribbon in binding.

Remember when I told you we were making our own bean bag toss board for the reception?

Hazard warnings appear on all manor of DIY and cleaning products, from paints and paint thinners to floor and window cleaners. But what are the risks? And what chemicals should you be more cautious of and take special precautions when using?

here's a super easy to make scrunchie that takes about 10-15 minutes to make